Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1911005.png)
w/o No. 1 stopper: 8.9 mm (0.350 in.)
5. INSTALL NEW DAMS
Install new dams with adhesive tape as shown in the illustration.
A: 7.0 mm (0.276 in.)
6. POSITION GLASS
a. Place the glass in the correct position.
b. Check that all contacting parts of the glass rim are set perfectly even.
c. Place reference marks on the glass and body.
d. Remove the glass.
7. CLEAN CONTACT SURFACE OF GLASS
Using a cleaner, clean the contact surface which is black-colored area around the entire glass rim.
NOTE: Do not touch the glass face after cleaning it.
