Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
c. Coat the glass with adhesive as shown in the illustration.
A: 12.0 mm (0.472 in.)
B: 8.0 mm (0.315 in.)
11. INSTALL WINDSHIELD GLASS AND MOULDING
a. Install the glass, aligning the reference marks using a suction rubber.
HINT: Check to see that the stoppers are attached to the body correctly
b. Lightly press the glass front surface for close contact.
c. Correct insufficient or protruded adhesive agent using a spatula.
HINT: Apply the adhesive agent up to the windshield glass edge.
d. Install a new windshield outside upper moulding to the windshield glass before the adhesive agent hardens.