Sequoia SR5 4WD V8-4.7L (2UZ-FE) (2001)
HINT: Lubricate 2 new O-rings with compressor oil and install them to the hoses.
3. INSTALL AND CHECK DRIVE BELT
4. CONNECT NEGATIVE (-) TERMINAL CABLE TO BATTERY
5. EVACUATE AIR FROM REFRIGERATION SYSTEM
6. CHARGE SYSTEM WITH REFRIGERANT
Specified amount:
Single A/C: 750 ± 50g (26.45 ± 1.76 oz.)
Dual A/C: 1050 ± 50g (37.03 ± 1.76 oz.)
7. INSPECT FOR LEAKAGE OF REFRIGERANT
Using a gas leak detector, check for leakage of refrigerant.
If there is leakage, check the tightening torque at the joints.