Sequoia SR5 4WD V8-4.7L (2UZ-FE) (2001)
HINT: Tape the screwdriver tip before use.
6. REMOVE REAR TRIM
Using a screwdriver, remove the rear trim.
HINT: Tape the screwdriver tip before use.
7. REMOVE REAR FLOOR MAT SUPPORT PLATE
8. w/o Rear No.2 seat: REMOVE QUARTER TRIM HOLE COVER
Using a screwdriver, remove the quarter trim hole cover.
HINT: Tape the screwdriver tip before use.
9. w/ Rear No.2 seat: REMOVE QUARTER TRIM UPPER BELT HOLE COVER
Using a screwdriver, remove the quarter trim upper belt hole cover.
HINT: Tape the screwdriver tip before use.
10. REMOVE QUARTER TRIM PANEL
a. w/o Tonneau cover:
Using a screwdriver, remove the 2 No.1 tonneau cover holder caps.
HINT: Tape the screwdriver tip before use.