Sienna V6-3.0L (1MZ-FE) (2003)
8. REMOVE ARMREST
9. REMOVE SEATBACK ASSEMBLY
Remove the 4 bolts and seatback assembly.
CAUTION: Do not store the seatback assembly with the airbag deployment side facing downward.
10. REMOVE SEATBACK FRAME
a. Disengage the hook from the seatback frame as shown in the illustration.
b. Remove the seatback frame from the seatback cover with pad.
INSTALLATION
NOTE: Never use airbag parts from another vehicle. When replacing parts, replace them with new parts.
1. INSTALL SEATBACK FRAME
a. Install the seatback frame to the seatback cover with pad.
b. Engage the hook to the seatback frame.
2. INSTALL SEATBACK ASSEMBLY
Install the seatback assembly to the seat adjuster with the 4 bolts.
Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)
3. INSTALL ARMREST
4. INSTALL ASSIST GRIP