Sienna AWD V6-3.3L (3MZ-FE) (2004)
1.
Pull back the carpet to access the striker bolts for removal.
2.
Remove existing striker and install new striker.
Torque: 12 N.m (120 kgf.cm, 8.8 in.lbf)
3.
Using an X-Acto knife or equivalent, modify the carpet opening to provide proper clearance for the striker to contact the seat lock. Use the
diagram as a guide.
4.
Replace the carpet over the striker and confirm proper retention between the seat lock and the striker.
5.
Repeat for opposite side.