toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Brakes - Rear Disc-Brake Groaning Noise|Page 5464 > < Brakes - Rear Disc-Brake Groaning Noise
Page 1
background image

Brake Rotor/Disc: Customer Interest
Brakes - Rear Disc-Brake Groaning Noise

BRAKES
BR002-04
REVISED

Title:
REAR DISC BRAKE GROAN NOISE

Models:
'04 Sienna

March 10, 2004

Introduction 

Some 2004 model year Sienna vehicles may experience rear disc brake groan noise during brake application. The rear disc brake pad material has been
changed to minimize this condition.

Applicable Vehicles 

^

2004 model year Sienna vehicles produced BEFORE the Production Change  Effective VINs shown below.

Production Change Information

Parts Information

Repair Procedure

Refer to the Technical Information System (TIS) and follow the Repair Procedure in the 2004 model year Sienna Repair Manual: Brake: Rear Disc
Brake: Overhaul.

1.

Resurface the rear disc.

2.

Install the countermeasure brake pad kit. Replace the shims if the originals are damaged or corroded.

Warranty Information

Applicable Warranty*:
This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from
the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Brakes - Rear Disc-Brake Groaning Noise|Page 5464 > < Brakes - Rear Disc-Brake Groaning Noise