Sienna AWD V6-3.3L (3MZ-FE) (2004)
8. INSTALL OIL PRESSURE SWITCH ASSY Adhesive
a. Apply adhesive to 2 or 3 threads of the oil pressure switch.
Adhesive: Part No. 08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent
b. Using a deep socket wrench 27 mm, install the oil pressure switch.
Torque: 15 Nm (153 kgf-cm, 11 ft. lbs.)
NOTICE: Do not start the engine within 1 hour after the installation.
c. Connect the oil pressure switch connector.
9. START ENGINE AND CHECK FOR LEAKS