Sienna AWD V6-3.3L (3MZ-FE) (2004)
/Page-457004.png)
8. REMOVE COWL TOP PANEL SUB-ASSY OUTER FRONT
9. REMOVE FRONT FENDER APRON SEAL RH
10. REMOVE V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
11. REMOVE VANE PUMP V BELT
12. REMOVE ENGINE MOVING CONTROL ROD
a. Remove the 5 bolts, the engine moving control rod and the engine mounting stay.
13. REMOVE ENGINE MOUNTING STAY NO.2 RH
a. Remove the bolt and the wire harness bracket.
b. Remove the bolt, the engine mounting stay No.2 and the engine mounting bracket No.2.
14. REMOVE GENERATOR BRACKET NO.2
a. Remove the nut and the generator bracket.
15. REMOVE CRANKSHAFT PULLEY
a. Using SST, loosen the pulley bolt.
SST 09213-54015 (91651-60855), 09330-00021
