Sienna AWD V6-3.3L (3MZ-FE) (2004)
c. Disconnect the fuel vapor feed hose.
d. Disconnect the fuel vapor feed hose No. 2.
e. Disconnect the 2 vacuum hoses.
f.
Remove the clamp.
g. Remove the 2 nuts and the emission control valve set.
13. REMOVE INTAKE AIR SURGE TANK
a. Disconnect throttle motor connector.
b. Disconnect the water by pass hose No. 3.
c. Disconnect the water by pass hose No. 2.
d. Disconnect the union to check valve hose.
e. Disconnect the ventilation hose.
f.
Remove the 2 set nuts of the pressure feed tube.