Sienna AWD V6-3.3L (3MZ-FE) (2004)
/Page-812005.png)
18. INSTALL FUEL TUBE JOINT NO.1
a. Apply a light coat of gasoline or spindle oil to a new O-ring, and install it to the fuel tube joint No. 1.
b. Apply a light coat of gasoline or spindle oil to the O-ring again, and install the fuel fuel tube joint No. 1 to the fuel suction plate.
c. Connect the connector.
19. INSTALL FUEL FILTER ASSY
a. Install the fuel filter with a new clip.
20. INSTALL FUEL PUMP
a. Install the fuel pump spacer to the fuel pump.
b. Apply a light coat of gasoline or spindle oil to a new O-ring, and install it to the fuel pump.
c. Apply a light coat of gasoline or spindle oil to the O-ring again, and install the fuel pump to the fuel suction plate.
d. Connect the fuel pump connector.
21. INSTALL FUEL SUCTION PLATE SUB ASSY
a. Apply a light coat of gasoline or spindle oil to a new O-ring, and install it to the fuel tube joint No. 1.
b. Apply a light coat of gasoline or spindle oil to the O-ring again, and install the fuel suction plate to the fuel suction support No. 1.
22. INSTALL FUEL SENDER GAGE ASSY
