Sienna AWD V6-3.3L (3MZ-FE) (2004)
/Page-1434001.png)
Impact Sensor: Service and Repair
Seat Position Sensor
Seat Position Air Bag Sensor
REPLACEMENT
1. PRECAUTION
2. DISCONNECT BATTERY NEGATIVE TERMINAL
3. REMOVE SEAT TRACK OUTER COVER LH
4. REMOVE SEAT TRACK BRACKET COVER INNER LH
5. REMOVE FRONT SEAT ASSY LH
6. REMOVE SEAT POSITION AIR BAG SENSOR
a. Disconnect the connector of the seat position airbag sensor.
b. Using a torx socket wrench (T30), remove the torx screw and the seat position airbag sensor.
