Sienna AWD V6-3.3L (3MZ-FE) (2004)
8.
Rear Wheel Camber Specifications
9.
Rear Total Toe Specifications
NOTE:
The Sienna rear suspension and axle beam assembly has a toe-correcting feature built in to the trailing arm bushings. (Refer to the Technical
Information System [TIS], 2004 model year Sienna New Car Features, Suspension - Chassis and Drive train - "Suspension".) For this reason, it
is important to focus on the total toe measurement rather than individual right and left toe measurements. Most 4-wheel alignment equipment
will measure and display individual right and left toe readings and may indicate that a right or left toe is out of specification. If total toe is
within specification, you may disregard individual right and left readings as the rear suspension and axle beam assembly will automatically
"correct" the individual toe settings while the vehicle is driven.