Sienna AWD V6-3.3L (3MZ-FE) (2004)
/Page-938002.png)
4. DISCONNECT TRANSMISSION WIRE
a. Disconnect the 7 shift solenoid valve connectors.
b. Remove the bolt and lock plate, and disconnect the ATF temperature sensor.
5. REMOVE TRANSMISSION WIRE
a. Disconnect the transmission wire connectors.
b. Remove the bolt and transmission wire.
6. INSTALL TRANSMISSION WIRE
a. Coat an O-ring of the transmission wire connector with ATF.
b. Install the transmission wire and bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
