Sienna AWD V6-3.3L (3MZ-FE) (2004)
SST 09330-00021
c. Place matchmarks on the rear flange and shaft.
d. Using SST, remove the rear flange.
SST 09950-40011 (09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04061, 09957-04010, 09958-04011)
NOTICE: Be careful not to damage the universal joint flange.
e. Remove the center support bearing assy No.2 and plate washer.
9. REMOVE CENTER SUPPORT BEARING ASSY NO.1
a. Using a chisel and a hammer, loosen the staked part of the nut.
b. Using SST to hold the front flange, remove the nut and plate washer.
SST 09330-00021
c. Place matchmarks on the front flange and shaft.