Sienna AWD V6-3.3L (3MZ-FE) (2004)
5. REMOVE TRANSFER CASE OIL SEAL
a. Using SST, remove the oil seal from the case.
SST 09308-00010
NOTICE: Do not damage the oil-seal-fitted surface of the case.
6. INSTALL TRANSFER CASE OIL SEAL
a. Using SST, drive a new oil seal into the case to the position shown in the illustration.
SST 09387-00010, 09950-70010 (09951-07150)
NOTICE: Do not install it obliquely.
b. Apply small amount of MP grease to the oil seal lip.
7. INSTALL CTR DIFFERENTIAL LOCK SLEEVE
8. INSTALL TRANSFER ASSY
9. INSTALL AUTOMATIC TRANSMISSION W/TRANSFER
10. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
11. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
12. CHECK ABS SPEED SENSOR SIGNAL
a. ABS WITH EBD & BA & TRAC & VSC SYSTEM