toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Drivetrain - Fluid Leaks From Transfer Case Vent|Page 5051 > < Drivetrain - ATF/Gear Oil leak From Transfer Case Vent|Page 5046
Page 1
background image

Technical Service Bulletin # TC008-07

Date: 070611

Drivetrain - Fluid Leaks From Transfer Case Vent

TRANSMISSION & CLUTCH
TC008-07

Title:
TRANSMISSION FLUID OR GEAR OIL
LEAK FROM TRANSFER CASE VENT

Models:
'04 - '06 Highlander (AWD) & Sienna (AWD)

June 11, 2007

Introduction
Some 2004 - 2006 model year AWD (4WD) Highlander or Sienna vehicles may display a transmission fluid or gear oil leak from a vent on the right side
of the transfer case. The leak is from the transfer RH (right-hand) bearing retainer No. 2 oil seal. Production improvements have been implemented to
prevent this condition from occurring. Follow the repair procedure below to replace the RH bearing retainer No. 2 oil seal assembly.

Applicable Vehicles

^

2004 - 2006 model year Highlander (AWD) and Sienna (AWD) vehicles produced BEFORE the Production Change Effective VINs shown below.

Production Change Information

Warranty Information

Applicable Warranty*:
This repair is covered under the Toyota Powertrain Warranty. This warranty is in effect for 60 months or 60,000 miles, whichever occurs first, from the
vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Parts Information

Drivetrain - Fluid Leaks From Transfer Case Vent|Page 5051 > < Drivetrain - ATF/Gear Oil leak From Transfer Case Vent|Page 5046