Sienna AWD V6-3.3L (3MZ-FE) (2004)
7. INSTALL WINDSHIELD GLASS STOPPER NO.2
a. Coat the installation part of the stopper with Primer G.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not keep any of the opened Primer G for later use.
-
Do not apply too much primer.
b. Install 2 new stoppers onto the glass, as shown in the illustration.
8. INSTALL WINDSHIELD GLASS STOPPER NO.1
a. Install 2 new stoppers to the vehicle body, as shown in the illustration.
9. INSTALL DAM, WINDOW GLASS ADHESIVE
a. Coat the installation part of the window glass adhesive dam with Primer G.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not apply too much primer.