Sienna AWD V6-3.5L (2GR-FE) (2007)
/Page-1698001.png)
Trunk / Liftgate Motor: Testing and Inspection
POWER BACK DOOR DRIVE UNIT
INSPECTION
1. INSPECT POWER BACK DOOR DRIVE UNIT
a. Remove the unit.
b. Apply battery voltage to the terminals and check the motor operation.
If the result is not as specified, replace the drive unit.
c. Check the resistance of the clutch terminals.
If the result is not as specified, replace the drive unit.
d. Reinstall the unit with the connector connected.
