Sienna AWD V6-3.5L (2GR-FE) (2007)
Initialization Procedure
1.
Fully close the power back door, if opened.
2.
Check that the power back door will fully open and fully close.
A.
Unlock the power back door using the transmitter switch or the door control switch.
B.
Turn the ignition switch to the "IG-OFF" position.
C.
Check that the power back door main switch is in the "ON" position.
D.
Check that the back door will fully open and fully close by pushing the power back door satellite switch or PBD button briefly.
NOTE:
Jam protection function becomes enabled through the above initialization procedure.