Sienna AWD V6-3.5L (2GR-FE) (2007)
(b) Tap the lock plate with a plastic-faced hammer so that there is no gap between the lock plate and the tank.
NOTICE: Do not tap the areas protruding around the pipes, brackets or tank ribs.
(c)
Install the punch assembly to the overhaul handle, inserting it in the hole in part A as shown in the illustration.
SST 09230-01010 (09231-01010, 09231-01020), 09231-14010
(d) While gripping the handle, adjust the stopper bolt so that dimension B is as specified below.
Dimension B: 8.8 mm (0.347 inch)