Sienna AWD V6-3.5L (2GR-FE) (2007)
e. Engage the claw fitting and install the 3 screws and blower case.
2. INSTALL BLOWER RESISTOR TRANSISTOR ASSEMBLY
a. Install the 2 screws and the blower resistor transistor assembly.
3. INSTALL COOLING UNIT MOTOR SUB-ASSEMBLY WITH FAN
a. Install the 3 screws and the cooling unit motor subassembly w/ fan.
4. INSTALL COOLER THERMISTOR NO.1 (for Automatic Air Conditioning System)
a. Engage the 2 claw fittings and the clamp and install the cooler thermistor No.1.