Sienna AWD V6-3.5L (2GR-FE) (2007)
/Page-803001.png)
Engine Control Module: Removal and Replacement
REMOVAL
1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
a. Push the right side wall and then push the left wall to release the stoppers.
b. Pull the glove compartment door sub-assembly rearward to remove it.
2. REMOVE NO. 2 INSTRUMENT PANEL BOX
a. Disengage the 2 claws and 4 clips, and remove the No. 2 instrument panel box.
3. REMOVE ECM
