Sienna AWD V6-3.5L (2GR-FE) (2007)
b. Remove the No. 2 ventilation hose and air cleaner hose band.
c. Disconnect the vacuum hose (EVAP) from the air cleaner hose.
d. Remove the 2 bolts and air cleaner cap subassembly.
14. REMOVE INTAKE AIR SURGE TANK ASSEMBLY
a. Disconnect the 2 water by-pass hoses from the throttle with motor body assembly. (*1)
b. Disconnect the fuel vapor feed hose assembly.(*2)
c. Disconnect the throttle with motor body assembly connector and clamp. (*3)
d. Disconnect the No. 1 ventilation hose. (*4)
e. Disconnect the union to check valve hose. (*5)