Sienna AWD V6-3.5L (2GR-FE) (2007)
(c)
Wind vinyl tape around the serrated part of the control valve.
(d) Remove the dust cover from the control valve housing.
(e)
Remove the 2 bolts and the control valve w/ control valve housing.
(f)
Remove the gasket.
(g) To prevent oil seal lip damage, wind vinyl tape around the serrated part of the control valve.
(h) Using a plastic hammer, remove the control valve w/ oil seal from the control valve housing.
(i)
Remove the oil seal from the control valve.
(j)
Using a screwdriver, remove the 4 control valve rings.
NOTICE: Be careful not to damage the grooves for the control valve rings.