Sienna AWD V6-3.5L (2GR-FE) (2007)
2. CONNECT PRESSURE FEED TUBE ASSEMBLY
(a)
Connect the pressure feed tube assembly to the power steering gear assembly.
(b) Install the clip.
(c)
Using SST, connect the return tube assembly to the power steering gear assembly.
SST 09023-12701
Torque: 22.5 Nm (229 kgf-cm, 17 ft. lbs.)
HINT:
^
Use a torque wrench with a fulcrum length of 300 mm (11.81 inch).
^
This torque value is effective when SST is parallel to the torque wrench.
(d) Install the tube clamp with the bolt.
Torque: 9.8 Nm (100 kgf-cm, 87 inch lbs.)
(e)
Install the tube clamp with the nut.