Sienna FWD V6-3.3L (3MZ-FE) (2006)
Navigation System: Service and Repair
Navigation Receiver
REMOVAL
1. REMOVE INSTRUMENT CLUSTER NO.1 FINISH PANEL CENTER
2. REMOVE INSTRUMENT CLUSTER NO.2 FINISH PANEL CENTER
3. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH
4. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET
a. Remove the 4 screws.
b. Disconnect the connector and remove the navigation receiver assembly with bracket.
5. REMOVE INSTRUMENT CLUSTER FINISH PANEL UPPER
a. Remove the 4 screws and the instrument cluster finish panel upper.
6. REMOVE NO.1 NAVIGATION BRACKET
a. Remove the 4 screws and the No.1 navigation bracket.