Sienna FWD V6-3.3L (3MZ-FE) (2006)
1. REMOVE INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
2. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY
a. Disconnect the connector and remove the 2 screws and the front No. 2 speaker assembly.
INSTALLATION
1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY
a. Connect the connector.
b. Install the front No. 2 speaker assembly with the 2 screws.
NOTE: Tighten the screws in order shown in the illustration to install the front No. 2 speaker assembly.
2. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
Stereo Speaker
STEREO COMPONENT SPEAKER
REMOVAL
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH
2. REMOVE STEREO COMPONENT SPEAKER ASSEMBLY
a. Remove the 2 screws.
b. Disconnect the connector and remove the stereo component speaker assembly.
INSTALLATION