Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-1430005.png)
6. REMOVE NO. 2 SPEAKER ASSEMBLY WITH BOX
a. Disconnect the connector.
b. Remove the 5 bolts and No. 2 speaker assembly with box.
INSTALLATION
1. INSTALL NO. 2 SPEAKER ASSEMBLY WITH BOX
a. Install the No. 2 speaker assembly with box with the 5 bolts.
NOTE: Tighten the bolts in order shown in the illustration to install the No. 2 speaker assembly with box.
b. Connect the connector.
2. INSTALL QUARTER TRIM FRONT PANEL ASSEMBLY LH
3. INSTALL BACK DOOR SCUFF PLATE
4. INSTALL BACK DOOR WEATHERSTRIP
5. INSTALL REAR DOOR WEATHERSTRIP LH
6. INSTALL REAR DOOR SCUFF PLATE LH
