Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-1539008.png)
28. REMOVE VISOR HOLDER
a. Remove the screw and visor holder.
29. REMOVE ROOF CONSOLE BOX ASSEMBLY
a. Remove the 2 screws and console box assembly.
b. Using a moulding remover, disengage the 2 claws.
c. Disconnect the map light switch connector and sliding roof switch connector and remove the console box.
30. REMOVE ASSIST GRIP SUB-ASSEMBLY
a. Using a screwdriver, disengage the claw and remove the assist grip cover.
HINT: Tape the screwdriver tip before use.
b. Remove the torx, screw and assist grip subassembly.
