Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-1545001.png)
Power Door Lock Actuator: Testing and Inspection
Rear Door Lock
INSPECTION
1. INSPECT REAR DOOR LOCK ACTUATOR ASSEMBLY LH
a. Apply battery voltage to the door lock and check operation of the motor.
HINT: If the result is not as specified, replace the door lock assembly.
b. Measure the resistance according to the value(s) shown in the table.
HINT: If the result is not as specified, replace the door lock assembly.
2. INSPECT REAR DOOR LOCK ACTUATOR ASSEMBLY RH
