Sienna FWD V6-3.3L (3MZ-FE) (2006)
c. Reconnect the O9 and O10 connectors.
d. Measure the voltage according to the value(s) in the given table.
If the result is not as specified, there may be a malfunction on the ECU side.
2. CHECK OUTER MIRROR CONTROL ECU RH
a. Disconnect the O11 and O12 connectors.
b. Measure the voltage and resistance according to the value(s) in the given table.
If the result is not as specified, there may be a malfunction on the wire harness side.