Sienna FWD V6-3.3L (3MZ-FE) (2006)
^
Warranty application is limited to correction of a problem based upon a customer's specific complaint.
Parts Information
Repair Procedure
Replace Rear No. 2 Seat Assembly.
1. Disconnect the negative (-) battery cable.
2. Remove the rear No.2 seat assembly. Refer to Technical Information System (TIS) 2006 or 2007 Sienna Repair Manual:
3. Disassemble the rear No.2 seat.
4. Using the updated seat track assembly reassemble the rear No.2 seat.
5. Install the rear No.2 seat assembly.
6. Reconnect negative (-) battery cable.
7. Re-initialize power Systems. Refer to the following TSBs:
8. Confirm repair.