Sienna FWD V6-3.3L (3MZ-FE) (2006)
Spoiler: Service and Repair
REMOVAL
1. REMOVE BACK DOOR CENTER GARNISH
a. Using a clip remover, disengage the 5 clips to remove the back door center garnish.
2. REMOVE REAR SPOILER
a. Disconnect the center stop light connector.
b. Remove the 3 nuts.
c. Using a clip remover, disengage the 2 clips to remove the rear spoiler.
3. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY
INSTALLATION
1. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY
2. INSTALL REAR SPOILER
a. Install the rear spoiler with the 3 nuts and 2 clips.
b. Connect the center stop light connector.
3. INSTALL BACK DOOR CENTER GARNISH