Sienna FWD V6-3.3L (3MZ-FE) (2006)
6. REMOVE REAR DISC (for Disc Type)
7. REMOVE PARKING BRAKE SHOE ASSEMBLY LH NO. 1 (for Disc Type)
8. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET (for Disc Type)
9. REMOVE PARKING BRAKE SHOE STRUT LH (for Disc Type)
10. REMOVE PARKING BRAKE SHOE ASSEMBLY LH NO.2 (for Disc Type)
11. SEPARATE PARKING BRAKE CABLE ASSEMBLY NO.3
a) Remove the 2 bolts, and disconnect the parking brake cable No. 3 from the backing plate.
12. REMOVE PARKING BRAKE CABLE ASSEMBLY NO.3
a) Remove the 3 bolts and the button to disconnect the parking brake cable No. 3 from the body.
b) Disconnect the parking brake cable No. 3 from the parking brake equalizer, and remove the parking brake cable No. 3.
c) Remove the parking brake cable LH guide from the parking brake cable assembly No. 3.
INSTALLATION
1. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.3
a) Install the parking brake cable LH guide to the parking brake cable assembly No. 3.
b) Connect the parking brake cable No. 3 to the parking brake cable equalizer.