Sienna FWD V6-3.3L (3MZ-FE) (2006)
Camshaft Bearing: Specifications
CAMSHAFT BEARING
LH
Using several steps, install and tighten the 10 bearing cap bolts uniformly in the sequence shown in the illustration.
Torque ............................................................................................................................................................................. 16 Nm (163 kgf-cm, 12 ft. lbs.)
RH
Using several steps, tighten the 10 bearing cap bolts uniformly in the sequence shown in the illustration.
Torque ............................................................................................................................................................................. 16 Nm (163 kgf-cm, 12 ft. lbs.)