Sienna FWD V6-3.3L (3MZ-FE) (2006)
Crankshaft Main Bearing: Specifications
CRANKSHAFT BEARING
Install crank shaft bearing.
HINT: Main bearings come in widths of 22.4 mm (0.882 inch) and 19.0 mm (0.748 inch). Install the 22.4 mm (0.882 inch) bearings in the No. 1 and
No. 4 cylinder block journal positions with the main bearing cap. Install the 19.0 mm (0.748 inch) bearings in the No. 2 and No. 3 positions.
Note:
For more Service Specification Related Information See: Service and Repair/Engine Overhaul/Engine Unit Inspection