Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-1196005.png)
1. INSPECT AIR OUTLET SERVO MOTOR
a. Inspect servomotor operation.
1. Connect the positive (+) lead from the battery to terminal 4 and negative (-) lead to terminal 5, then check that the arm turns to "FACE"
side smoothly.
2. Connect the positive (+) lead from the battery to terminal 5 and negative (-) lead to terminal 4, then check that the arm turns to "FOOT"
side smoothly.
If operations are not as specified, replace the servomotor.
