Sienna FWD V6-3.3L (3MZ-FE) (2006)
4. INSTALL COOLER REFRIGERANT LIQUID PIPE A
a. Remove the attached vinyl tape from the pipe and the connecting part of the cooler condenser core.
b. Sufficiently apply compressor oil to a new O-ring and the fitting surface of the pipe joint.
Compressor oil: ND-OIL 8 or equivalent
c. Install the O-ring on the cooler refrigerant liquid pipe A.
d. Install the cooler refrigerant liquid pipe A on the cooler condenser core with the bolt.
Torque: 5.4 N.m (55 kgf.cm, 47 in.lbf)
5. INSTALL DISCHARGE HOSE SUB-ASSEMBLY
a. Remove the attached vinyl tape from the tube and the connecting part of the cooler condenser core.
b. Sufficiently apply compressor oil to a new O-ring and the fitting surface of the hose joint.
Compressor oil: ND-OIL 8 or equivalent
c. Install the O-ring on the discharge hose subassembly.
d. Install the discharge hose sub-assembly on the cooler condenser core with the bolt.
Torque: 5.4 N.m (55 kgf.cm, 47 in.lbf)
6. CHARGE REFRIGERANT
SST 07110-58060 (07117-58060, 07117-58070, 07117-58080, 07117-58090, 07117-78050, 07117-88060, 07117-88070, 07117-88080)
Specified amount: 780 ±30 g (27.5 ± 1.06 oz.)
7. WARM UP ENGINE
8. INSPECT REFRIGERANT LEAKAGE