Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-1226001.png)
Control Assembly: Service and Repair
A/C Control Assembly
Removal and Installation
REMOVAL
1. REMOVE AIR CONDITIONING NO.2 CONTROL ASSEMBLY
a. Release the 4 claw fittings and release the air conditioning No. 2 control assembly.
b. Disconnect the connectors and remove the air conditioning No. 2 control assembly.
INSTALLATION
1. INSTALL AIR CONDITIONING NO.2 CONTROL ASSEMBLY
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE CONTROL KNOB SUB-ASSEMBLY (for Manual Air Conditioning System)
a. Remove the control knob sub-assembly.
