Sienna FWD V6-3.3L (3MZ-FE) (2006)
Housing Assembly HVAC: Service and Repair
Blower Unit
Removal and Installation
REMOVAL
1. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY WITH PASSENGER AIRBAG ASSEMBLY
HINT: Refer to the instructions for removal of the instrument panel sub-assembly w/ passenger airbag assembly.
2. REMOVE HEATER TO FOOT DUCT NO.1
a. Remove the clip and the heater to foot duct No. 1.
3. REMOVE ECM
4. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY (w/ Stereo Compartment Amplifier)
5. REMOVE BLOWER ASSEMBLY
a. Release the 2 clamps, the 2 nuts and the wire harness.
b. Remove the bolt, the 2 screws and the nut.
c. Remove the blower assembly.
INSTALLATION