Sienna FWD V6-3.3L (3MZ-FE) (2006)
Housing Assembly HVAC: Service and Repair
Blower Unit (For Rear Air Conditioning System)
Removal and Installation
REMOVAL
1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
SST 07110-58060 (07117-58080, 07117-58090, 07117-78050, 07117-88060, 07117-88070, 07117-88080)
2. REMOVE REAR DOOR SCUFF PLATE RH
3. REMOVE BACK DOOR SCUFF PLATE
4. REMOVE QUARTER TRIM PANEL ASSEMBLY FRONT RH
5. REMOVE ROOF HEADLINING GARNISH REAR
6. REMOVE RR WINDOW SIDE GARNISH ASSEMBLY NO.2 RH
7. REMOVE AIR DUCT ASSEMBLY
a. Remove the 2 clips and the air duct assembly from the air conditioning blower assembly.
8. REMOVE COVER SUB-ASSEMBLY
a. Disengage the 2 claw fittings and remove the cover sub-assembly.
9. REMOVE AIR DUCT ASSEMBLY
a. Remove the air duct assembly.