Sienna FWD V6-3.3L (3MZ-FE) (2006)
6.
Push and hold the "MODE" and "E/M" buttons simultaneously for 10 seconds until the "CAL" indicator appears on the compass display.
NOTE:
At this time, the compass display is locked in "N".
7.
Drive the vehicle slowly at 5 mph (8 km/h), or less, in a circle until the "CAL" indication goes OFF and the direction is displayed. If there is NOT
enough space to drive in a circle, drive around the block until the direction is displayed.
After performing the above steps, calibration is complete.
NOTE:
^
Do NOT perform calibration of the compass in a place where the Earth's magnetic field is subject to interference by artificial magnetic
fields (underground parking, under a steel tower, between buildings, roof parking, near a railroad crossing, near a large vehicle, etc.)
^
During calibration, do NOT operate electric systems (moon roof, power windows, etc.) as they may interfere with the calibration.