Sienna FWD V6-3.3L (3MZ-FE) (2006)
Center Mounted Brake Lamp: Service and Repair
HIGH MOUNTED STOP LIGHT ASSEMBLY
REMOVAL
1. REMOVE BACK DOOR GARNISH CENTER (w/ Rear Spoiler)
2. REMOVE REAR SPOILER COVER (w/ Rear Spoiler)
3. REMOVE CENTER STOP LIGHT ASSEMBLY
a. w/o Rear spoiler:
1. Disconnect the connector and remove the 2 screws and the center stop light assembly.
b. w/ Rear spoiler:
1. Install the strap on the connector of the center stop light assembly.
c. w/ Rear spoiler:
1. Remove the 2 screws.
d. w/ Rear spoiler:
1. Pass the connector through the inside of the rear spoiler sub-assembly, and remove the center stop light assembly.
HINT: Leave the strap inside the rear spoiler sub-assembly.
INSTALLATION
1. INSTALL CENTER STOP LIGHT ASSEMBLY
2. INSTALL REAR SPOILER COVER
3. INSTALL BACK DOOR GARNISH CENTER