Sienna FWD V6-3.3L (3MZ-FE) (2006)
Key Cylinder Lamp: Testing and Inspection
IGNITION KEY CYLINDER LIGHT
ON-VEHICLE INSPECTION
1. KEY CYLINDER LIGHT ASSEMBLY
a. Connect the battery positive (+) lead to the terminal 1 and the battery negative (-) lead to the terminal 2, and check that the indicator light
comes on.
2. TRANSPONDER KEY AMPLIFIER
a. Inspect key cylinder light operation.
1. Connect the battery positive (+) lead to the terminal 2 and the battery negative (-) lead to the terminal 6, and check that the indicator light
comes on.