Sienna FWD V6-3.3L (3MZ-FE) (2006)
Vanity Lamp: Testing and Inspection
ON-VEHICLE INSPECTION
1. LH VISOR ASSEMBLY
a. Inspect vanity light resistance.
1. check that the resistance exists between the terminal 1 and the terminal 2 when the light is operated.
Resistance:
OFF (closed): 10 kOhms or higher
ON (opened): Below 1 Ohm
2. RH VISOR ASSEMBLY
a. Inspect vanity light resistance.
1. check that the resistance exists between the terminal 1 and the terminal 2 when the light is operated.
Resistance:
OFF (closed): 10 kOhms or higher
ON (opened): Below 1 Ohm