Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-348004.png)
9. REMOVE FRONT FENDER APRON SEAL RH
10. REMOVE NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT
11. REMOVE VANE PUMP V BELT
12. REMOVE ENGINE MOVING CONTROL ROD
a) Remove the 5 bolts, the engine moving control rod and the engine mounting stay.
13. REMOVE ENGINE MOUNTING STAY NO. 2 RH
a) Remove the bolt and the wire harness bracket.
b) Remove the bolt, the No. 2 engine mounting stay and the No. 2 engine mounting bracket.
14. REMOVE NO. 2 GENERATOR BRACKET
a) Remove the nut and the generator bracket.
15. REMOVE CRANKSHAFT PULLEY
a) Using SST, loosen the pulley bolt.
SST 09213-54015 (91651-60855), 09330-00021