Sienna FWD V6-3.3L (3MZ-FE) (2006)
4. REMOVE FRONT AXLE LH HUB BOLT
a. Temporarily install the 2 nuts and washers to the front axle LH hub bolt as shown in the illustration.
b. Using SST(s) and a screwdriver or an equivalent to hold the front axle, remove the front axle LH hub bolt.
SST 09628-10011
5. INSTALL FRONT AXLE LH HUB BOLT
a. Install a washer and nut to a new front axle LH hub bolt as shown in the illustration.
b. Using a screwdriver to hold the front axle, install the hub bolt by torquing the nut.
6. INSTALL FRONT DISC
7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY LH
8. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kg-cm, 76 ft. lbs.)