Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-666029.png)
b. Check the voltage and resistance between each terminal of the wire harness side connectors and body ground.
If the result is not as specified, there may be a malfunction on the wire harness side.
2. CHECK AIRBAG SENSOR ASSEMBLY (AIRBAG ECU)
a. Disconnect the A21 ECU connector.
b. Check the voltage and resistance of each terminal of the wire harness side.
If the result is not as specified, there may be a malfunction on the wire harness side.
3. CHECK ECM
