Sienna FWD V6-3.3L (3MZ-FE) (2006)
Variable Valve Timing Actuator Position Sensor: Service and Repair
VVT SENSOR
REMOVAL
1. REMOVE NO. 2 AIR CLEANER INLET
2. REMOVE AIR CLEANER ASSEMBLY
3. REMOVE VVT SENSOR
a. Disconnect the 2 VVT sensor connectors.
b. Remove the 2 bolts and the 2 VVT sensors.
INSTALLATION
1. INSTALL VVT SENSOR
a. Apply a light coat of engine oil to the O-ring on the VVT sensor.
b. Install the 2 VVT sensors with the 2 bolts.
Torque: 8.0 N.m (80 kgf.cm, 71 in.lbf)
c. Connect the 2 VVT sensor connectors.
2. INSTALL AIR CLEANER ASSEMBLY.
3. INSTALL NO. 2 AIR CLEANER INLET.